Graber Aluminum Blinds Houston

GRABER ALUMINUM BLINDS | Horizontal

6-gauge Classic Supreme/Privacy Series Aluminum Horizontal Blinds and 8-gauge Performance Supreme/Privacy Series Aluminum Horizontal Blinds.

8-gauge by request only - Call 281-320-0009.

Graber Insignia 1" Mini Blinds (6 gauge)

• 1" slats manufactured from American-made Alcoa® aluminum - the world's finest.
• Advanced Finished Technology repels dust and is scratch and stain resistant.
• Includes all mounting hardware.
• An extra slat for future repairs if one is ever damaged.

Micro Blinds

• 1/2" slats manufactured from American-made Alcoa aluminum - the world's finest.
• Advanced Finished Technology repels dust and is scratch and stain resistant.
• Includes all mounting hardware.

Window Width and Height: Custom

Options

Lift Cord Position: (Left or Right)
Lift Cord Position - You have the choice of a right or left cord control to raise and lower your shade. The right side is considered to be "standard" placement of the cord. This is ultimately a convenience consideration – place the cord where it will be most convenient for you to control.

If you request multiple shades on one headrail, you may choose the cord position for each individual shade. Standard is left control for the left shade and right control for the right shade.

If you request multiple shades on one headrail with the Continuous Loop Lift System, standard controls are a left control operating the left fabric panel and a right control operating the right fabric panel; another option is that both be operated with one control. For three panel shades, the center panel will be controlled from the right or left panel.

Tilter Location: (Left or Right)

Tilter Location - Mechanism that controls the angle of the slats or vanes. This can be either a wand or cord tilter.

Special Length Controls: (Cord or Sill)

Select between standard 3/4 length from top of window or full length controls spanning from top of window to the base of the window sill.

Selecting sill for continuous cord mounted at base of sill is widely chosen for the purpose of protecting children. When window cords are within reach, young children may become entangled and accidentally strangle.

Hold-Down Brackets:

Select between standard 3/4 length from top of window or full length controls spanning from top of window to the base of the window sill.

Selecting sill for continuous cord mounted at base of sill is widely chosen for the purpose of protecting children. When window cords are within reach, young children may become entangled and accidentally strangle.

Mount Position

At the time of ordering, indicate either inside mount(IB) or outside mount(OB).

An inside mount blind is installed inside the window casing, from the top or back, and is most often used for standard windows and those with window frames you want to showcase, not cover.

An outside mount blind is installed on or outside the window casing, covering an area larger than the window itself. It is ideal for shallow window casings, door mounts, or creating specific decorative looks.